The RANGER900 combines the best of both worlds – 900 MHz and cellular into one user friendly industrial package. This solution reduces the customers overall cellular and monthly cost by integrating SignalFire’s 900 MHz network with the RANGER platform. With this solution, only one RANGER Cloud and SIM Card subscription is necessary to accommodate up to 32 SignalFire 900 MHz nodes (32 total read / write registers). The number of nodes depends on the quantity of measurements per node. For example, if a Sentinel is measuring level and battery voltage, the number of total Sentinels would be 16 because
each are using 2 registers from the available 32.

Environmental:

• Operating Temperature: -40°F to 185°F (-40°C to 85°C)
• Humidity: 0 – 95% non-condensing

Power:

• Solar Powered (integrated 10W panel)
• Built-in rechargeable battery & charge controller
• 14 days of autonomy with no sun

Enclosure Specs & Mounting:

• NEMA 4X / IP66, Polycarbonate UV Rated
• 9.8” (240mm) wide x 14.1” (357mm) tall x 7.0” (178mm) deep
• 15.3 lbs (6.9 kg)
• 2” U-Bolt mount included

Antenna (included):

• Panel mounted omni-directional LTE
• Panel mounted omni-directional 900 MHz

900 MHz Specifications:

• Integrated SignalFire DIN Gateway V2 (see SignalFire DIN Gateway V2 for complete specifications)
• Radio Power/Range: 500 mW (approx. 3 miles line of sight (5 km))
• Antenna Type: Omnidirectional. +2dB gain, -105dB receive sensitivity
• Frequency: 902-928 MHz license-free. ISM band compliant with FCC Part 15 and Industry Canada
• Wireless 900 MHz End Nodes: 32 maximum. Depends on number or registers being used for each node.
• Internal Diagnostics: Line voltage, signal strength, error conditions event logging, Modbus communications
• Inputs & Outputs:
» Two (2) digital inputs
» Two (2) digital outputs (open collector pull down)
» Three (3) 1-5Vdc / 4-20mA analog inputs

Cellular Specifications:

• Input/Output integrated with RANGER electronics:
» 1 Latching Relay Output (2A @ 30Vdc; 0.3A @ 110Vac; 0.5A @ 125Vac). Failsafe & local automation configurable.
» 2 Digital Inputs report state, total counts, frequency (2kHz max), volume total with K Factor
» Analog Input (1-5Vdc or 4-20mA). Configurable for flow totalizing mode.

• Data Interface: LTE CAT M1 / NB-IoT, auto-selectable
• SparkPlug B messaging
• Cellular Radio Power: 23dBm
• Electrical Connection: Pluggable terminal block, 16-30AWG screw terminals
• Local Micro-USB Configuration Port

• Estimated Monthly Data Usage:
» Check-in interval dependent
» 1 min = 27 MB
» 5 min = 5.4 MB
» 15 min = 1.08 MB
» 60 min = 0.27 MB

• LTE band support: Cat-M1 / NB-IoT: B1, B2, B3, B4, B5, B8, B12, B13, B14, B17, B20, B25, B26, B28, B66
• Supports 4FF SIM type
• Power saving features: eDRX
• Secure socket using TLS
• PTCRB Certified

For complete Technical Specs on SignalFire RANGER900, refer to product datasheet HERE

SOLAR PANEL DIMENSIONS

Title	Categories	Tags	File Type	Link	hf:doc_categories	hf:doc_tags	hf:file_type
Cloud API Manual	Manual	Cloud, DIN RANGER, LTE-M1 Cellular, Pressure RANGER, RANGER, RANGER Wall Mount, RANGER900	pdf	Download	manual	cloud din-ranger lte-m1-cellular pressure-ranger ranger ranger-wall-mount ranger900	pdf
RANGER Connectivity Options	Datasheet	Cloud, DIN RANGER, Pressure RANGER, RANGER, RANGER Wall Mount, RANGER900	pdf	Download	datasheet	cloud din-ranger pressure-ranger ranger ranger-wall-mount ranger900	pdf
RANGER900 Datasheet	Datasheet	LTE-M1 Cellular, RANGER900	pdf	Download	datasheet	lte-m1-cellular ranger900	pdf
RANGER900 Dimensional Drawing	Drawing	LTE-M1 Cellular, RANGER900	pdf	Download	drawing	lte-m1-cellular ranger900	pdf
RANGER900 Manual	Manual	LTE-M1 Cellular, RANGER900	pdf	Download	manual	lte-m1-cellular ranger900	pdf