Intrinsically Safe Wireless Tank Level Monitoring
- Available with flexible or rigid magnetostrictive level probe with single or dual floats
for level and interface measurements
- Integrated temperature sensor to measure fluid temperature
- Class 1 Division 1 intrinsically safe
- Rugged design for demanding outdoor environments
- Up to 1/2 mile range
- 1” NPT mounting interface
- Automatically configures as a star or mesh network
The SignalFire Float Scout consists of a magnetostrictive level probe mated with a Sentinel wireless node which creates a wireless link between the sensor and the Gateway. The Sentinel will take level and temperature readings, and send the data (via the SignalFire wireless mesh network) to the Gateway where the data is available via a Modbus RTU or TCP interface. The system is powered by internal lithium batteries or optional C1D1 rated solar package. Sensor data along with node-diagnostic information is available at the Gateway.
Operating Temp: -40ºC to 60ºC
Power: 3 X D Lithium battery pack. Field replaceable. Class 1 Division 1 certified.
Battery Life: 1 min. check-in: 5+ years, 5 min. check-in: 10+ years
Data Interface: Wireless – Modbus data available at GW
Reported Values: Product level, interface level, temperature, status.
Data Update Rate: User selectable – 5 seconds to 1 hour
Radio Power: 40 mW
Antenna Type: Internal weather resistant, omnidirectional.
Receive Sensitivity: -109 dB
Frequency: 902-928 MHz, FHSS license-free ISM band, FCC part 15 compliant.
Networks: Up to 65520 separate network
Diagnostics: Battery voltage, signal strength, error conditions, Faults
Range: Up to 1/2 mile
Measurement resolution: 0.0001”
Repeatability: Equal to Resolution
Linearity: ± 0.01% of span or ± 0.039”, whichever is greater.
Material: Flexible: PVDF. Rigid: 316 Stainless
Dead Band: Flexible: 6”-17” depending on sensor length. Rigid: 2”
Length: Flexible: 65” to 600”. Rigid: 20” to 288”. Available in 1” increments
Ultraflex Model: -40°C to +70°C | -40°F to +158°F